Sugelary Home Remover Gel, Household Cleaner for Washing Machine, Refrigerator Strips, Grout Cleaner Best for Home Sink, Kitchen, Showers

This is my second purchase and I bought 2 more bottles because they were on sale. 🙂

We bought first one bottle to try after reading good reviews. This stuff works like magic. Tried it around the edge on the kitchen sink which had a gross black line below the faucet. After a couple of overnight applications the edge became clean as new, see the photo.
We used it around the house in few other places. Old stains needed few applications but you would see the difference right away after the first time.
Finally started to work on our washing machine’s rubber seal which was super gross will black stains set into the rubber. A couple of applications and the difference it very impressive. Probably would need another 2-3 overnight applications. And this was when we ran out so bought 2 more.

The best thing is while it cleans out the gunk, it doesn’t damage the sealer, metal, or rubber.

The seller sent a note right after the purchase and asked to reach out if there are any issues. But we had no issues with the product or delivery.

Highly recommend to buy!

THIS IS FOR REMOVING SIGNIFICANT, STUBBORN MOLD STAINS on a front loader washing machine:

I RARELY ever take the time to write a review. But I feel this product motivated me to do so. For 2 reasons, because I had tried SO many different products to remove mold stain with little to no effect. This DID work! The other reason I write the review is to confirm like other reviewers have mentioned… you have to be patient and persistent.

I had decided to go ahead and order 2 bottles in HOPES this might work– it was my final shot. If this didn’t work– we were going to get rid of our washing machine in frustration. Received the bottles. Was a bit skeptical, but anxious. I used latex gloves to apply the solution– not sure how important that is– but you can definitely smell the product (gel form). It has a mildly pungent, cleaning product smell. I generously applied the product to ALL of the moldy stains. I let is sit completely overnight. Came back the next morning– WIPED IT OFF with a clean towel. There was some improvement… but honestly, I would say it looked like it got rid of maybe 10% of my stain area. Now, I’m more skeptical–and frankly, a little disappointed. Determined, I applied it again the next night. Came back the next morning… to my surprise, about 30% gone– and what was still there– it appeared “lighter” shade. Waited a few days… applied again– now, 60% gone! (i’ve now run out of a full bottle because I am putting this stuff on!). Open the 2nd bottle– apply again… next morning– 90% gone! One last application… 100% gone! Not kidding. I was so pleasantly shocked to see that mold that we’d been suffering with for long over a year with countless remedy failures.

This stuff works. You just have to stay after it. If you are truly determined to get rid of the mold and you’re willing to stay after it. This is the solution. Again, I’ve probably written about 5 reviews in my lifetime. I have no “skin in the game” and am receiving nothing for my review– just felt compelled to help anyone else out there as frustrated as I was.

I was skeptical about this product when I first bought it. I was not sure it could possibly work as well as I had been told it would. IT DOES! It is the best cleaner I have found for our tumbled marble shower. I was so impressed with the first bottle that I just bought a second one. I have tried every cleaner I could find, but this one is the ONE. It works! It really does. I was also impressed the company took the time to email a “thanks for purchasing” message. I want to thank THEM for making such a good product!

I was hesitant to try this product as many others make similar claims, but fail to deliver. However not this one. I am still stunned at the efficacy of this product. It remove every trace of the black mould ingrained in the boot seal of my front load washer. I still check to see that it really did it. This is the best product I have ever used for this purpose. Will never have to search for one that works, as I have found it. You will not be disappointed with the results on your washers boot seal. Now I haven’t tried it on anything else as this was my sole purpose for getting this. But the results prove its worth and that it works! Must mention the only thing I did differently than the instructions provided was I left it on over night, and it worked fabulously. The instructions say far less time, but this couldn’t be helped and there was no damage to the rubber at all. I’d give it 10 stars if I could!

The gasket on my front load washer was so moldy and gross looking that I was about ready to replace it with a new one. I had tried cleaning it with both vinegar and regular bleach, but neither one of those touched it. My husband sent me a link for a similar mold remover gel from another online retailer that was about twice the price of this one. I was getting ready to order it when I decided to check Amazon first and found this gel at half the price.

I really didn’t have much hope that this gel would work but wanted to give it a try before replacing the gasket. The first time I applied it, I spread on a thick layer in the middle of the day and left it overnight with the washer door open just enough so that it wasn’t in contact with the gasket. The next morning the gasket was just as moldy and disgusting looking as it had been the day before. I wiped off the gel residue and ran a cleaning cycle before doing my laundry for the day. After the laundry was done, I repeated the same gel application process, not wanting to waste the gel and still hoping for a miracle.

The next morning I got my miracle…sort of. After the second application of the gel and sitting for another night with the door open, the gasket was about 80 percent free of mold. I was a little shocked but so happy with the improvement. I repeated the same process for a third night and the next morning all of the mold was gone. I really wish I had thought to take a before picture, but I didn’t. The picture I have included is what my washer gasket looks like after three applications.

While the outside of the gasket looks brand new, unfortunately the gel didn’t yield the same stellar results on the mold inside the gasket fold. I have done additional applications of the gel in the fold but there has been very little improvement. For me, however, this gel is worth its weight in gold just for the incredible way it killed the mold on the outside of the gasket.

Here is how I used the gel for the best results:

*I applied the gel in a thick layer directly from the bottle all around the mold on the outer gasket.
*I did not spread the gel after application, I just left it in a thick layer the way it came out of the bottle.
*I did not scrub or scour the gasket.
*I applied the gel early in the day and left it overnight, for a total of at least 18 hours each time.
*I left the washer door open a little bit during the treatment period (enough that the door wasn’t in contact with the gasket but still closed enough to keep the cat out, lol).
*After each application I wiped out the remaining gel and ran a cleaning cycle prior to doing any laundry, just to make sure no gel would come in contact with clothing.

After so many applications my bottle of gel is almost empty. I will definitely be ordering more and expect future bottles will last much longer since I will be able to stay on top of the mold problem. If I find a way to get the gel to work on the inside of the gasket fold I will come back here and let you know how I did it. In the meantime, I wish you much success with your own bottle of this miracle gel.